多功能杀菌剂的合成及其性能研究

在现有季铵盐类杀菌灭藻剂上增加一个脂键，连接一个有机酸基团，合成一种兼具阻垢缓蚀功能的新型工业水处理用杀菌灭藻剂(多功能杀菌剂)，经一系列评价实验表明：新型杀菌剂是较理想的杀菌剂，在较低浓度下，对硫酸盐还原菌(SRB)及腐生菌(TGB)均有很好的杀灭效果，优于1227杀菌剂，同时还具有较好的缓蚀阻垢效果。     

Micro assembly injection moulding

Injection moulding is established as one of the most common manufacturing processes of thermoplastics due to its high degree of automation and the short cycle times. Micro injection moulding is a rapidly growing technology that allows for the efficient production of very complex micro parts in high series. The “Market Analysis for Microsystems II 2002–2005” of the Nexus Task Force anticipates a yearly growth in the field of micro system technology of about 20% (Wechsung et al. 2002). This study identifies in addition to the continuous miniaturization the growing use of polymers in micro systems (Schneider et al. 2001). No other material group offers this wide range of material properties and permits to choose processing parameters and application properties according to necessities (Gächter 2000). While the production processes of micro technical components are mainly controllable, the assembly of these components to hybrid micro systems is a bottleneck to the industrial large scale production. The assembly itself represents a large fraction of the added product value and gains in importance with growing complexity and miniaturization of the systems.     

精细地质研究成果在油田特高含水期综合调整中的应用

利用密井网资料，可以准确揭示单砂体的分布形态和接触关系，使砂体的空间展布更为清楚，应用精细地质研究成果，使措施井及措施层位的优选更有针对性，有效改善了措施效果，在以单砂体为单元的注采关系调整中得到了广泛应用。对控制高含水期油田含水上升速度，提高采收率发挥了重要作用。     

高压变频技术在油田注水系统中的应用与节能分析

油田注水系统的耗电量一般占整个油田生产耗电的40％-60％,因此降低注水系统的能耗可显著降低油田的生产成本。常规的通过调节阀门开启度来达到调节注水泵出口压力和流量的作法,会使很大一部分能量造成浪费,要解决这个问题,可以采取对注水泵进行调速的方法。文章论述了通过高压变频技术对注水泵进行调速,从而达到节能效果的基本原理;对一台恒速泵和一台变频调速泵并联运行时的效率进行了分析,并对应用实例进行了计算,注水站的效率比原来提高了9．04％,收到了显著的节能效果。     

井下注剂用小直径管起下装置的研制

针对目前国内小直径管井下注剂设备配套工具不完整,不能满足现场使用要求的情况,研制了井下注剂用小直径管起下装置。该装置采用可正反向旋转的液马达驱动主轴的方案,通过同步齿轮带动链条,夹紧机构使链条上的夹块夹住小直径管,由液压系统实现整个操作与控制,从而使装置上下运动。井场模拟试验表明,井下注剂用小直径管起下装置可完全满足小直径管起下作业的要求,且可避免小直径管管体的变形和损坏。     

Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

粉喷桩处理软弱地基在祁临高速公路的应用

结合工程实例，介绍了粉喷桩的所属类型，粉喷桩对软弱地基加固的原因，所适应土质及加固特点，阐述了祁临十八合同段的粉喷桩施工过程及施工中应注意的若干问题，得出粉喷桩处理不良地基效果良好。     

对油气运聚研究中一些概念的再思考

非均质地层中烃类的扩散流和达西流可以同时存在，并可相互转换。据Welte等1997年计算，在致密泥岩层中，扩散流和达西流的流速分别为18m／Ma和15m／Ma，说明在致密地层中这两种流动几乎没有差别，同时说明了泥岩中的流动也可以用达西公式来表述。油、气的浮动和渗流虽然都是在地下多孔介质中的流动，但前者是油、气在水中上浮，不呈连续相流动，而后者是油、气呈连续相与水一起流动，因此浮力没有含烃饱和度的相对渗透率的要求，也不能用达西的密度差，浮力流是二交运移最基本的流动式。地下确实存在油、气的幕式运多和幕式以注，但幕式是一个有时间尺度的概念。油、气的运移和聚集是一个带莫式特征的连续过程，不能只强调强度较大的幕式活动而忽视了连续过程的存在，再加上油源的不稳定和通道的非均质性，因此单依据流体包裹体的分析就确定油气藏是由2或3期充注所形成，似乎有些难以置信。